GRUB2: Difference between revisions
Created page with "== grub_is_using_legacy_shim_lock_protocol while booting == Problem; : You are using the old GRUB, probably because an upgrade broke or you didn't run grub-install when needed. EndeavourOS '''<u>EXAMPLE</u>''', commands need to be modified for your distribution, not modifying these will may your PC un-bootable Boot in to the Live Installer for the OS (probably what you installed the OS from). Open gparted from the applications menu Open the console app OPTIONAL :..." |
No edit summary |
||
| Line 28: | Line 28: | ||
<tabber> | <tabber> | ||
|-|Normal = | |-|Normal = | ||
mount /dev/nvme1n1p2 /mnt | mount /dev/nvme1n1p2 /mnt | ||
|-|LUKS = | |-|LUKS = | ||
mount /dev/mapper/endeavouros /mnt | mount /dev/mapper/endeavouros /mnt | ||
</tabber> | </tabber> | ||
mount /dev/nvme1n1p2 /mnt/boot/efi | mount /dev/nvme1n1p2 /mnt/boot/efi | ||
Revision as of 16:30, 10 June 2026
grub_is_using_legacy_shim_lock_protocol while booting
Problem; : You are using the old GRUB, probably because an upgrade broke or you didn't run grub-install when needed.
EndeavourOS EXAMPLE, commands need to be modified for your distribution, not modifying these will may your PC un-bootable
Boot in to the Live Installer for the OS (probably what you installed the OS from).
Open gparted from the applications menu
Open the console app
OPTIONAL : if you have an encrypted drive you need to "open" the drive, so it can be mounted.
In Gparted the correct drive will look like this:
Take the Partition name and put it in to the command
sudo cryptsetup open /dev/nvme1n1p2 endeavouros
Mount both the root (/) and boot (/boot/efi) partitions
mount /dev/nvme1n1p2 /mnt
mount /dev/mapper/endeavouros /mnt
mount /dev/nvme1n1p2 /mnt/boot/efi
Enter an Arch chroot, this will only exist on Arch based systems.
arch-chroot /mnt
Reinstall GRUB
grub-install
Press Ctrl+D to exit the chroot, then type reboot to restart the system and everything should work.